⎝⎛新宝1娱乐⎞⎠

solution

solution

  • Comprehensive power quality management equipment
    Comprehensive power quality management equipment

    The comprehensive management of power quality is to collect the load-side or system-side current, analyze the reactive current, harmonic current, and three-phase unbalanced current of the load, and then obtain the current that needs to be compensated. By controlling the power electronics, the required compensation current is generated. To achieve the effect of compensating for reactive power, suppressing harmonic currents and compensating for three-phase imbalance. Main functions: 1. Reactive power compensation 1. Ensure that the system power factor meets national standards and avoid fines caused by the power factor 2. ...

    2019-09-02
  • Linyang Microgrid Solution-EMS
    Linyang Microgrid Solution-EMS

    The smart microgrid energy management system collects real-time information of distributed generation power points, lines, distribution networks, and loads to form real-time monitoring of the entire microgrid power flow, and adjusts the microgrid in real time based on microgrid operation constraints and energy balance constraints. Operation. Linyang Microgrid distributed energy management system is a comprehensive system that helps reduce energy consumption per unit area, reduce energy use costs, improve energy use safety, and ensure environmental quality. Smart distributed energy ...

    2017-09-30
  • 林 洋 微 网 -PCS Products
    林 洋 微 网 -PCS Products

    LYC600 series energy storage bi-directional converter (PCS) is the link between the power grid and electrical energy storage equipment. It bears the role of charging and energy feedback. It is one of the key equipment of the energy storage system and provides for the vigorous development of distributed power generation systems. Prerequisites. At the same time, PCS, as a controllable energy storage power source in the microgrid, resolves the contradiction between the large grid and distributed power sources, allowing the microgrid to operate in conjunction with the large grid, as well as when the grid fails or needs .. .

    2017-09-29
  • Fan energy saving solution
    Fan energy saving solution

    Fans are widely used in ventilation, dust extraction and cooling of factories, mines, tunnels, cooling towers, vehicles, ships and buildings; ventilation and induction of boilers and industrial furnaces; cooling and ventilation in air conditioning equipment and household appliances Drying and sending of grain; wind tunnel wind source and hovercraft inflation and propulsion. The traditional induced draft fan is a high-voltage asynchronous motor, which adopts a hydraulic coupler speed regulating device, which has low energy saving effect, large self-loss, energy loss compared to frequency conversion speed regulation, and ...

    2015-12-04
  • Industrial boiler flue gas waste heat solution
    Industrial boiler flue gas waste heat solution

    The exhaust temperature of industrial boilers is generally not lower than 180 ° C and up to 350 ° C. High-temperature flue gas not only pollutes the environment, but also wastes a lot of heat energy. High-temperature flue gas is not used reasonably. Can effectively reduce fuel consumption. The heat pipe heat exchanger can recover most of the waste heat lost by the industrial boiler due to the exhaust gas, and use the recovered heat for preheating water and air to meet the requirements of enterprises to reduce the temperature of the flue gas. Heat pipe ...

    2015-12-04
  • Air compressor energy saving service solution
    Air compressor energy saving service solution

    Working principle: Air compressors are widely used. During its long-term and continuous operation, the electrical energy is converted into mechanical energy and thermal energy according to the principle of energy conservation. Air compressors generate a large amount of heat energy when they are working, and are finally wasted into the environment in the form of air cooling or water cooling. The air compressor generates a lot of heat energy, not only the high operating cost, but also the environmental pollution is extremely serious. If this part of heat energy is recycled and used in the company's domestic heating, industrial water, hot water air-conditioning, etc., it will surely dispel ...

    2015-12-04
  • Enterprise steam condensate recovery solution
    Enterprise steam condensate recovery solution

    The condensed water is generated during the heating and transportation of steam, which not only has good water quality but also contains a lot of heat. Closed condensate water recovery equipment is the key equipment of steam condensate water recovery system. It can be widely used in paper heating, industrial processing, chemical, food, pharmaceutical, grain and oil processing, rubber, cotton spinning, printing and dyeing, wood and other industries. The condensate water recovery of the system is closed. It can also be used for the recovery of steam condensate in hotels, hospitals and civil buildings.

    2015-12-04
  • Plastic mechanical heating mode solution
    Plastic mechanical heating mode solution

    Electromagnetic heating is a device that uses the principle of electromagnetic induction to convert electrical energy into thermal energy. The electromagnetic heating system consists of two parts: an electromagnetic controller and a heating coil. The original machine ’s temperature-controlled power source rectifies, filters, and inverts the power frequency AC power to 15-30KHZ high-frequency AC power through an electromagnetic controller. It is connected to the electromagnetic heating coil through a connection line. Generates a high-speed changing alternating magnetic field. When the magnetic field lines in the magnetic field pass through magnetic permeability ...

    2015-12-04
  • Air-cooled central air-conditioning energy-saving service solution
    Air-cooled central air-conditioning energy-saving service solution

    Higher exhaust pressure of the air-conditioning compressor will increase the compression power and reduce the gas transmission coefficient, thereby reducing the cooling efficiency. According to the actual needs of users, we introduce the "phase change cooling energy-saving system" applied in the field of air conditioning. This system sprays water through the atomizer to the air inlet of the air conditioner condenser, which effectively reduces the ambient temperature of the air inlet of the condenser. , Improve the heat transfer efficiency of the condenser, and achieve the purpose of reducing the compressor exhaust pressure, thereby reducing the actual ...

    2015-12-04
  • Motor energy saving solutions
    Motor energy saving solutions

    Permanent magnet transmission technology Permanent magnet transmission technology uses magnetic force to drive the load to work, and realizes non-contact torque transmission between the motor and the load. The motor-driven active rotor rotates at high speed, and the magnetic field lines are cut in the magnetic field generated by the driven rotor to generate an induced magnetic field. The interaction force between the magnetic fields drives the load to work and realizes the transmission of torque. Technical principle The permanent magnet drive technology uses magnetic force to drive the load to work, and realizes non-contact torque transmission between the motor and the load ...

    2015-12-04
  • Smart Energy Efficiency Management Cloud Platform
    Smart Energy Efficiency Management Cloud Platform

    The Smart Energy Efficiency Management Cloud Platform is designed to implement management energy saving and cost reduction, LED lighting energy saving transformation, waste heat recovery and utilization, distributed photovoltaic power plants, enterprise microgrids, etc. The company provides comprehensive energy efficiency management and energy-saving transformation services to improve the energy efficiency of enterprises and save enterprises ...

    2015-12-01
  • Power operation and maintenance services
    Power operation and maintenance services

    The power operation and maintenance service system relies on the original system service department for development and development, and provides suggestions for power supply companies at all levels in the pre-construction survey, installation, commissioning, commissioning, acceptance, operation and maintenance of power information collection projects.

    2015-10-23
Page 1 of 2 Go to:
真人游戏平台注册 七乐彩 炸金花 欢乐拼三张